Teeny - 3D printed Chastity device

Please Choose the Variants If there are

3D PRINTED COCK CAGE - TEENY

This cage is not related to JosieLYnn 3D printed line of products.

Get sizes recommendations by our anonymous AI:

Teeny comfortable cages for tiny little dicks. Lightweight and solid, this is your best companion to lock and forget your cock. Ideal for short term play and long-term chastity wear.
Made of Nylon material, It is 3D printed.

It includes one cage tube, 2 rings + 1 integrated lock ready to use.

Innovative "Plus" version: Allow usage of external padlock, numbered padlocks, or a leash during sessions. It is all up to your imagination 😉

3D PRINTED COCK CAGE


NEW Premium black color available!
The paint is a body safe shiny coating, same as in the automative industry, there is a base coat with the color applied, followed by a clear coat for a glossy coating effect.
It is waterproof, can be used in hot baths, showers and won't chip off like other chastity paint. You want the best, we provide the best.

Sold without leash, external color paddlock or numbered paddlock. Those items can be bought separately.

NORMAL INTERNAL LOCK VERSION (AVAILABLE IN PINK, BLACK, RED, OR WHITE)


"PLUS" Version (possibility to attach leash, external paddlock, numbered plastic locks)

HOW TO MEASURE

Measure for the base ring

Measure the circumference around your cock from behind the balls. You can use a fabric tape measure (the kind dressmakers use) to get the measurement, or, if you don’t have one, you can use a piece of string and a ruler. Wrap the tape measure or string around your cock, going behind the balls. The tape should be snug but not tight.

Now you have your circumference you need to divide it by 3.14 to get the diameter. We’ve done some sample calculations below to show you how it works:

In imperial:7 inches ÷ 3.14 = 2.25 inches diameter
6.25 inches ÷ 3.14 = 2 inchesdiameter
5.5 inches ÷ 3.14 = 1.75 inches diameter
4.7 inches ÷ 3.14 = 1.5 inches diameter

Measure for the Cage Tube

Ideally, you want a cage that is just long enough to allow the tip of your penis to come to rest at the end of the cage.

Take a ruler and place it on the underside of your flaccid penis, measuring from tip to base. Do not press the ruler into your scrotum, as this will give you an incorrect measurement. Just allow the ruler to make contact with the skin there. You should be completely flaccid when taking this measurement, but not the “retracted inside the body because it’s cold or scared” type of flaccid. For accurate results, take this measurement several times throughout the day, to find your most common length. When you have found your measurement, deduct a ¼ to a ½ inch off the final results and this will be your ideal length for a cage.

SIZES AND OPTIONS:

Dimensions:

Length of Tube : 16mm/0.63inch - Internal width 33.5mm/1.32inch

Rings sizes available:

  • 1.42'' / 36mm ring
  • 1.57'' / 40mm ring
  • 1.77'' / 45mm ring
  • 1.97'' / 50mm ring
  • 2.17'' / 55mm ring
  • 2.36" / 60mm ring

Colors available: PremiumBlack / White / Pink / Red / PLUS version (white)

This item is 3D printed.

We do not take complaints for color loosing on pink and red devices, please judge accordingly. For Long time wear, we suggest white or black.

3D printed cock cage
How to put on a chastity device