Lock Up Your Desires with Testical Chastity | Oxy-Shop - Oxy-shop

V2 - Balls Cage - The Phantom "Shell" - 3D printed chastity

Please Choose the Variants If there are

3D-printed Testicle Chastity Cage

Balls Cage - Scrotum Sleeve Chastity Device, a masterpiece of erotic craftsmanship that takes chastity play to extraordinary heights. This exquisitely designed device offers a unique and thrilling experience for those seeking the perfect balance of restriction and stimulation.


As you slip into this alluring device, your senses awaken to a symphony of pleasure and anticipation. The smooth, high-quality materials embrace your scrotum with a tantalizing grip, intensifying every touch and caress. The restrictive nature of the sleeve keeps your desires locked away, giving power to the keyholder and elevating the experience of surrender and submission.

Fully immerse yourself in the tantalizing world of chastity!

3D-printed Testicle Chastity Cage

Get sizes recommendations by our anonymous AI:

Please note the Phantom cages and Base Rings are interchangeable with other accessories of the same type.

Made of Nylon material, this cage is one of the most comfortable and lightweight we ever made. This model offers sizes of options to choose from. Very solid and sturdy, suitable for long-term chastity wear.
It is 3D printed per order and delivered accordingly. We use the V2 Phantom model with premium paint - The color does not get porous and stays even after showers.

It includes one cage tube, 1 ring with balls sleeve +1 integrated lock.

Check out the spare balls sleeve on this link.

3D-printed Testicle Chastity Cage

Measure for the base ring

Measure the circumference around your cock from behind the balls. You can use a fabric tape measure (the kind dressmakers use) to get the measurement, or, if you don’t have one, you can use a piece of string and a ruler. Wrap the tape measure or string around your cock, going behind the balls. The tape should be snug but not tight.

Now you have your circumference you need to divide it by 3.14 to get the diameter. We’ve done some sample calculations below to show you how it works:

In imperial:7 inches ÷ 3.14 = 2.25 inches diameter
6.25 inches ÷ 3.14 = 2 inchesdiameter
5.5 inches ÷ 3.14 = 1.75 inches diameter
4.7 inches ÷ 3.14 = 1.5 inches diameter

Measure for the Cage Tube

Ideally, you want a cage that is just long enough to allow the tip of your penis to come to rest at the end of the cage.

Take a ruler and place it on the underside of your flaccid penis, measuring from tip to base. Do not press the ruler into your scrotum, as this will give you an incorrect measurement. Just allow the ruler to make contact with the skin there. You should be completely flaccid when taking this measurement, but not the “retracted inside the body because it’s cold or scared” type of flaccid. For accurate results, take this measurement several times throughout the day, to find your most common length. When you have found your measurement, deduct a ¼ to a ½ inch off the final results and this will be your ideal length for a cage.


Micro: Total length: 45mm/1.77inch - Internal width 32mm/1.26inch

S: Total length: 60mm/2.36inch - Internal width 36mm/1.42inch

M: Total length: 80mm/3.14inch - Internal width 36mm/1.42inch

L: Total length: 90mm/3.53inch - Internal width 36mm/1.42inch

XL: Total length: 105mm/4.12inch - Internal width 36mm/1.42inch

Spare chastity Tubes

Rings sizes available:

  • 38mm/1.49"
  • 40mm/1.57"
  • 45mm/1.77"
  • 50mm/1.96"
  • 55mm/2.16"
  • 60mm/2.36"
Balls cage rings

Colors available: Pink / Black

This item is made to order and 3D printed. Processing time might vary from 2 days to 8 days depending on orders volume.


AIR LOCK + 5pc Numbered padlock (NO METAL LOCK)

Air Lock



Balls Cage - 3D printed chastity



Spare chastity tube

How to put on a chastity device